Cartridge Filters / Housing

spun pp depth filter cartridge

  • The SP Series cartridges are made up of 100% pure PP fibers. The fibers have been carefully spun together to form a true graded density cartridge.

Configuration:
Std : Dia 2.5" x 10", 20", 30" and 40" Jumbo - 4" x 10" & 20"

Flow per 10":
Std: 16 LPM and Jumbo 50 LPM for raw water with an operating ng pressure of 2.5 bar.

Micron: 0.5, 1,5,10,25,50

wound polypropylene cartridge filter

  • The PP series cartridges offer wide chemical resistency spectrum. These cartridges are manufactured by PP cord wound on a PP core in a precise pattern, assuring a high efficiency rating as well as a high dirt holding capacity.

Configuration:
Std : Dia 2.5" x 10", 20", 30" and 40" Jumbo - 4" x 10" & 20"

Flow per 10":
Std 16 LPM and Jumbo 50 LPM for raw water with an operating pressure of 2.5 bar.

Micron: 0.5, 1,5,10,25,50

pleated polypropylene cartridge filter

  • The PL PP series of cartridges are the latest form of truly graded density microfiber media in pleated form. The multi layer pleating has created the graded density with coarser on the outside and finer towards the inside thereby increasing the dirt holding with very high efficiency.

Flow per 10":
Std 16 LPM and Jumbo 50 LPM for raw water with an operating pressure of 2.5 bar.

Micron: 0.2, 0.45, 1, 5, 10, 25

Type : DOE - SOE - CODE 7

Dia(INCH)2.52.52.52.5
Height(INCH)10203040

washable net filter cartridge

  • The RL series is all PP washable type cartridges used primarily for pre filtration of variety of fluids. The coarse micron ratings of 30 and 80 micron make it ideal for good pre filtration. The PP construction makes it compatible for a wide range of chemicals and liquids.

Configuration:
Std: Dia 2.5" x 10" & 20" and Jumbo 4.5" x 10" & 20"

Flow per 10":
Std: 20 LPM and Jumbo 40 LPM for water with operating pressure of 2.5 bar.

Micron: 30, 80

Dia(INCH) 2.52.544
Height(INCH) 10201020

stainless steel filter cartridge

  • The AC & ACP series filter cartridges are made out of versatile SS wire mesh in various micron ratings. The SS construction makes the filter resistant to all chemicals & temperatures. The surface filtration technology boosts the flow rate to almost double of the entire standard filter cartridge with ZERO replacement cost.

Configuration:
Std: Dia 2.5" X 10", 20", 30" & 40", Jumbo: 4" x 10", 20", 30"& 40"

Flow per 10":
Std: 30 LPM and Jumbo 50 LPM for raw water with operating pressure of 2.5 bar.

Micron: 5, 10, 15, 25, 40, 50, 80, 100 UM

Dia(INCH) 2.52.52.52.544
Height(INCH) 102030401020

polypropylene housing

  • The plastic filter housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 5", 10" and 20" configuration with both slim for low flow and Jumbo for large flow application. The Optional Relief Valve on the inlet of the cap gives ease of air release and prevents vacuum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The top seated silicon O rings in the slim and the body fitted double O rings in the Jumbo makes it Leak Proof even at high pressure applications.

Configuration:
Std suitable for Single 2.5" x 10, 20" and Jumbo suitable for Single 4.5" x 10" & 20" cartridges

Connection :
1/2", 3/4", 1" AND 1.5"

Polypropylene / Poly carbonate / SAN

Dia(INCH) 2.52.544
Height(INCH) 10201020

polypropylene filter bags assembly

  • The series bag vessels are made of light weight corrosion resistant PP to give all strength required without being bulky. The fixed head mounting & compact design makes it easy to mount to any machine. All the PBA models are supplied with Pressure gauge, wrench & drain valve.

Configuration:
Std : Dia 4.5" x 10" & 20" with 1.5" BSP female threaded connection

Flow per 10":
100 LPM for raw water with operating pressure of 2.5 bar.

Connection: 1.5" BSP Female Threaded Connection.

Dia(INCH) 4.54.5
Height(INCH) 1020

SS multi cartridge housing

  • Stainless steel housing are wall mounted heavy duty unit meant for small filtration system.it brushed steel pump with cast steel head make it ideal for pressure and temprature application.its suits all typ of doouble open end cartridge.

Connection: 
1/2, 3/4, 1 & 1.5

MOC :
SS 304 & SS 316

Dia(INCH) 2.52.52.54.54.54.5
Height(INCH) 102030102030

MR FILTER INDUSTRIES

  • Gala NO. 1, Gr Floor, Royal Regency Bldg,
  • C-Wing, Near Sai Baba Mandir, Sonarpada
  • Dombivli(E), 421 203

Mr. Raj Kumar Mishra

  • 08080198044
  • rajmishra@mrfiltertech.com

COPYRIGHT ©2016 MRFILTERTECH ALL RIGHTS RESERVED.

SITE DESIGNED BY PAGEMAKERZ

Scroll to Top