Polypropylene Housing

  • The plastic filter housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 5", 10" and 20" configuration with both slim for low flow and Jumbo for large flow application. The Optional Relief Valve on the inlet of the cap gives ease of air release and prevents vacuum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The top seated silicon O rings in the slim and the body fitted double O rings in the Jumbo makes it Leak Proof even at high pressure applications.

Configuration:
Std suitable for Single 2.5" x 10, 20" and Jumbo suitable for Single 4.5" x 10" & 20" cartridges

Connection:

1/2", 3/4", 1" AND 1.5"

Polypropylene / Poly carbonate / SAN

MR FILTER INDUSTRIES

  • Gala NO. 1, Gr Floor, Royal Regency Bldg,
  • C-Wing, Near Sai Baba Mandir, Sonarpada
  • Dombivli(E), 421 203

Mr. Raj Kumar Mishra

  • 08080198044
  • rajmishra@mrfiltertech.com

COPYRIGHT ©2016 MRFILTERTECH ALL RIGHTS RESERVED.

SITE DESIGNED BY PAGEMAKERZ

Scroll to Top